PS 8000 T
- Click to magnify
The microprocessor controlled laboratory power supplies of series EA-PS 8000 T cover state-of-the-art technology. They already offer many functions and features in their standard version, making the use of this equipment remarkably easy and most effective.
The units are provided with a memory function for five different preset values, with the ability to save and recall these just by the push of a button Thus frequently used settings are at immediate reach to the user. making the work easy and time efficient.
Output voltage and current are clearly visualised on two four-digit displays. The functional status of the unit and its buttons are indicated via LEDs, providing easier and most comfortable usage to the user.
Output voltage, current and OVP values can be set by two rotary encoders. A “fine setting” mode for high resolution adjustment is provided as well. With the „lock“ mode, buttons and encoders can be locked to prevent unintentional change of settings. The main power switch is located on the back panel, an output shutdown button on the front panel.
Options:
- Digital interface cards (USB, RS232, CAN, GPIB, LAN/Ethernet)
- High-Speed (increased dynamics by decreased output capacity, for models from 1kW)
- Click to magnify
- Click to magnify
PS 8000 DT/2U
Units as from 1kW output power are equipped with a flexible autoranging output stage which provides a higher output voltage at lower output current, or a higher output current at lower output voltage, always limited to the max. nominal output power. Therefore, a wide range of applications can already be covered by the use of just one single unit.
Output voltages between 16V and 360V, output currents between 4A and 60A and output power ranges between 320W and 1500W are available.The output terminals of DT models are located on the front panel, and with 2U models they are located on the rear panel.
All important information is clearly visualised on a matrix display. Information about the actual output values, preset set values for U, I, P, over- and undervoltage protection, the actual control state (CV,CC,CP), errors and settings of the setup menu are clearly displayed. In order to ease adjusting of values by the existing rotary encoders, it can be switched between coarse and fine setting mode, just by a key stroke. All these features contribute to an operator-friendliness. With the LOCK press button the controls can be locked, in order to protect the equipment and the loads from unintentional misuse.
The „System Bus“ on the rear of the unit provides sense inputs and a Master-Slave circuit input. Thuse the devices can be integrated into a complete system without much effort.
The series PS 8000 2U offers identical functionality in a 19" draw-out case with 2U and output on the rear.
Options:
- Digital interface cards (USB, RS232, CAN, GPIB, LAN/Ethernet)
- High-Speed (increased dynamics by decreased output capacity, for models from 1kW)
- Two-quadrants-module (internal, active load with car ignition sequence according DIN 40839)(2U series only)
User guides